Komatsu PC27R-8
Fleco Land Stone Rake Bucket 1200mm wide 1.5 ton to 3.8 ton Digger Excavator
**BOLT ON HANGER BRACKET – ALLOW 1-2 FOR BRACKET TO BE MADE**
16 tines
75mm gaps between each tine
1200mm wide
10mm outer tines
6mm inner tinesIdeal for landscaping and land reclamation. Bespoke design, allowing customers to choose tine
length, tine spacing, rake width and cross bar position.Evans and Reid manufacture at our factory in Neath, South Wales a full range of land rakes for
all makes and models of excavator up to approximately 20 tonnes in weight. We can manufacture
exactly what you need without compromise. You don’t have to make do with what we’ve got in
stock!200mm Cone Splitter – 1.9 ton – 2.8 ton Digger Excavator
Suitable for splitting roots, timber and firewood
Hoses included
Demoter Hydraulic Mini Excavator Breaker / Pecker 1.8 – 2.8 Tonne
All hydraulic breakers are supplied with a point and a fitted headbracket with 2 pins to fit your excavator, hoses can be supplied at extra cost, other dedicated systems such as Harford safelock or Klac mount can be fitted for an additional charge.
Hydraulic Thumb – 1.9 ton – 2.8 ton Digger Excavator
**THUMB MUST BE WELDED TO UNDERSIDE OF ARM**
The Evans & Reid Hydraulic Thumb is a versatile attachment which grips a wide variety of any shape
material like a thumb.The thumb can be used in conjunction with buckets or rakes and is easily folded away or removed
when not needed.There are two types available:
Mechanical: Thumb is held by a stay bar in a fixed position for the bucket to pinch against. CLICK HERE FOR OUR MECHANICAL OPTIONHydraulic: A hydraulic ram replaces stay bar which allows a greater versatility of use allowing the
thumb to be powered as well as the bucket.Design shape “curved or straight†can be specified according to materials to be handled to increase
productivityTilting Ditcher / Grading Bucket – 1.9 ton – 2.8 ton Digger Excavator
All tilting ditching buckets are twin ram with the ability to tilt 45 degrees left and right.
Twin rams give greater stability for precise grading with a tilted bucket
Bushed and greased pivots with hardened steel bushes for greater life.Pilot operated check valves are fitted to every unit to prevent loss of control if a hose breaks and
hydraulically lock the cylinders when the control valve is in neutral.
This is especially import on open centred hydraulic systems, without the valves the tilt angle
would not hold, and the bucket would move.The valves do not need adjusting or routine maintenance; they must always remain in the circuit.
Variable orifice valves are also fitted to control the speed of movement. These valves are
important to prevent damage to the system or bucket if the bucket tilts too quickly.
Option of bolt on cutting edge.Manufactured for all makes and models of excavator from 1.5 to 20 tonnes.
Tile Drain Bucket – 1.9 ton – 2.8 ton Digger Excavator
Tile drain buckets have proven to give excellent service in pipe laying
and other utility applications as they dig out what you need to, saving and back fill costs and time.Useful in clay and sticky ground, the bucket tapers both from
top to bottom and front to back aiding the emptying of the bucket and easy release from the
trench.Ripper Tooth – 1.9 ton – 2.8 ton Digger Excavator
Dimensions & specifications for 1.5 tonne to 13 tonne excavators can be found below.
We also manufacture ripper teeth for micro excavators and excavators up to 30 tonnes.
