JCB 19C-1PC
Tilting Ditcher / Grading Bucket – 1.5 ton – 1.8 ton Digger Excavator
All tilting ditching buckets are twin ram with the ability to tilt 45 degrees left and right.
Twin rams give greater stability for precise grading with a tilted bucket
Bushed and greased pivots with hardened steel bushes for greater life.Pilot operated check valves are fitted to every unit to prevent loss of control if a hose breaks and
hydraulically lock the cylinders when the control valve is in neutral.
This is especially import on open centred hydraulic systems, without the valves the tilt angle
would not hold, and the bucket would move.The valves do not need adjusting or routine maintenance; they must always remain in the circuit.
Variable orifice valves are also fitted to control the speed of movement. These valves are
important to prevent damage to the system or bucket if the bucket tilts too quickly.
Option of bolt on cutting edge.Manufactured for all makes and models of excavator from 1.5 to 20 tonnes.
Tile Drain Bucket – 1.5 ton – 1.8 ton Digger Excavator
Tile drain buckets have proven to give excellent service in pipe laying
and other utility applications as they dig out what you need to, saving and back fill costs and time.Useful in clay and sticky ground, the bucket tapers both from
top to bottom and front to back aiding the emptying of the bucket and easy release from the
trench.Excavator Tree Shear 150mm Max Diameter Cut 1.5 ton to 3 ton
1.5 ton – 3 ton tree shear
MIN CUT OUT DIAMETER 40MM
MAX CUT OUT DIAMETER 150MM
OIL PRESSURE 180-200 BAR
HYDRAULIC FLOW 25-60L/MIN
160KGContact our sales team for more information
1.5T to 1.8T Mini Digger Heavy Duty Riddle Sorting Bucket
Type 1: Bars or ribs around bucket.
Type 2: Bars across bucket
Type 3: Grid Bucket
Type 4: Bucket with removable cutting edge.Click here for the lightweight option
Existing hangers are needed before we can make this attachment
Ripper Tooth – 1.5 ton – 1.8 ton Digger Excavator
Dimensions & specifications for 1.5 tonne to 13 tonne excavators can be found below.
We also manufacture ripper teeth for micro excavators and excavators up to 30 tonnes.
Trapezoidal ‘V’ Drainage Bucket – 1.5 ton – 1.8 ton Digger Excavator
Mainly used for ditching “V” buckets is an essential tool digging a stable ditch in a wide variety of
ground conditions.Ideal for drainage work in wet conditions
These buckets are manufactured to your specific requirements
Please call and give us the top & bottom dimension along with, with the depth you need to dig.
The operating conditions you are in.
We will then design a bucket to suit your exact requirements.
Your bucket will be designed to give the optimum digging efficiency and made to last.
Each bucket can be fitted with teeth or hardened cutting edge and has a top roll for added
strength.The roundness of the rear of the bucket has been well designed to allow optimum filling of the
bucket to raise productivity.
