Hitachi ZX160LC-3-HCME
Curved Hydraulic Thumb – 12 ton – 16 ton Digger Excavator
**THUMB MUST BE WELDED TO UNDERSIDE OF ARM**
450mm wide
1450mm long
The Evans & Reid Hydraulic Thumb is a versatile attachment which grips a wide variety of any shape
material like a thumb.The thumb can be used in conjunction with buckets or rakes and is easily folded away or removed
when not needed.There are two types available:
Mechanical: Thumb is held by a stay bar in a fixed position for the bucket to pinch against. CLICK HERE FOR OUR MECHANICAL OPTIONHydraulic: A hydraulic ram replaces stay bar which allows a greater versatility of use allowing the
thumb to be powered as well as the bucket.Design shape “curved or straight†can be specified according to materials to be handled to increase
productivityFleco Land Stone Rake Bucket 2000mm wide 10 ton to 18 ton Digger Excavator
**BOLT ON HANGER BRACKET – ALLOW 1-2 FOR BRACKET TO BE MADE**
16 tines
75mm gaps between each tine
1200mm wide
10mm outer tines
6mm inner tinesIdeal for landscaping and land reclamation. Bespoke design, allowing customers to choose tine
length, tine spacing, rake width and cross bar position.Evans and Reid manufacture at our factory in Neath, South Wales a full range of land rakes for
all makes and models of excavator up to approximately 20 tonnes in weight. We can manufacture
exactly what you need without compromise. You don’t have to make do with what we’ve got in
stock!Excavator Tree Shear 350mm Max Diameter Cut 10 ton to 20 ton
10 ton – 20 ton tree shear
MIN CUT OUT DIAMETER 60MM
MAX CUT OUT DIAMETER 350MM
OIL PRESSURE 230-250 BAR
HYDRAULIC FLOW 140-170L/MIN
600KGContact our sales team for more information
Trapezoidal ‘V’ Drainage Bucket – 14 ton – 18 ton Digger Excavator
Mainly used for ditching “V” buckets is an essential tool digging a stable ditch in a wide variety of
ground conditions.Ideal for drainage work in wet conditions
These buckets are manufactured to your specific requirements
Please call and give us the top & bottom dimension along with, with the depth you need to dig.
The operating conditions you are in.
We will then design a bucket to suit your exact requirements.
Your bucket will be designed to give the optimum digging efficiency and made to last.
Each bucket can be fitted with teeth or hardened cutting edge and has a top roll for added
strength.The roundness of the rear of the bucket has been well designed to allow optimum filling of the
bucket to raise productivity.Fuel Pump for Hitachi ZX160LC-3-HCME
Need more parts for this machine? CLICK HERE
Starter Motor for Hitachi ZX160LC-3-HCME
Need more parts for this machine? CLICK HERE
Track Tension Valve for Hitachi ZX160LC-3-HCME
Need more parts for this machine? CLICK HERE
