- 4 IN 1 BUCKETS
- CONE SPLITTERS
- DEEP DIG BUCKETS
- EARTH DRILLS / EARTH BORERS
- GRAPPLES
- HYDRAULIC BREAKERS / PECKERS
- HYDRAULIC MULCHER SHREDDERS / FLAIL MOWERS
- LAND STONE RAKES
- LOG SPLITTERS
- PALLET FORKS
- RIDDLE SORTING BUCKETS
- RIPPER TEETHS
- ROTATING GRAPPLES
- THUMBS
- Tile Drain Buckets
- Tilting Ditcher / Grading Buckets
- Trapezoidal ‘V’ Drainage Buckets
- Tree Shears
Pins Bushes & Seals for Airman AX40-2
Select options
This product has multiple variants. The options may be chosen on the product page
3ton – 5ton Bolt On Bucket Teeth
BOLT ON BUCKET TEETH TO SUIT A 3ton – 5ton MACHINES COMPLETE WITH NUT & BOLTS CENTRE TOOTH 235MM LONG 54MM BOLT CENTRES
Select options
This product has multiple variants. The options may be chosen on the product page
Drive Sprocket for Airman AX40-2
Need more parts for this machine? CLICK HERE
Hydraulic Mulcher Shredder 100cm Head with hammer blades 2 – 5 Tonne
Curved Hydraulic Thumb – 3.9 ton – 5.5 ton Digger Excavator
**THUMB MUST BE WELDED TO UNDERSIDE OF ARM**
350mm wide
900mm wide
The Evans & Reid Hydraulic Thumb is a versatile attachment which grips a wide variety of any shape
material like a thumb.
The thumb can be used in conjunction with buckets or rakes and is easily folded away or removed
when not needed.
There are two types available:
Mechanical: Thumb is held by a stay bar in a fixed position for the bucket to pinch against. CLICK HERE FOR OUR MECHANICAL OPTION
Hydraulic: A hydraulic ram replaces stay bar which allows a greater versatility of use allowing the
thumb to be powered as well as the bucket.
Design shape “curved or straight†can be specified according to materials to be handled to increase
productivity
Fleco Land Stone Rake Bucket 1320mm wide 3.9 ton to 5.5 ton Digger Excavator
**BOLT ON HANGER BRACKET - ALLOW 1-2 FOR BRACKET TO BE MADE**
16 tines
75mm gaps between each tine
1200mm wide
10mm outer tines
6mm inner tines
Ideal for landscaping and land reclamation. Bespoke design, allowing customers to choose tine
length, tine spacing, rake width and cross bar position.
Evans and Reid manufacture at our factory in Neath, South Wales a full range of land rakes for
all makes and models of excavator up to approximately 20 tonnes in weight. We can manufacture
exactly what you need without compromise. You don't have to make do with what we've got in
stock!
Hydraulic Thumb – 3.9 ton – 5.5 ton Digger Excavator
**THUMB MUST BE WELDED TO UNDERSIDE OF ARM**
The Evans & Reid Hydraulic Thumb is a versatile attachment which grips a wide variety of any shape
material like a thumb.
The thumb can be used in conjunction with buckets or rakes and is easily folded away or removed
when not needed.
There are two types available:
Mechanical: Thumb is held by a stay bar in a fixed position for the bucket to pinch against. CLICK HERE FOR OUR MECHANICAL OPTION
Hydraulic: A hydraulic ram replaces stay bar which allows a greater versatility of use allowing the
thumb to be powered as well as the bucket.
Design shape “curved or straight†can be specified according to materials to be handled to increase
productivity
Tilting Ditcher / Grading Bucket – 3.9 ton – 5.5 ton Digger Excavator
All tilting ditching buckets are twin ram with the ability to tilt 45 degrees left and right.
Twin rams give greater stability for precise grading with a tilted bucket
Bushed and greased pivots with hardened steel bushes for greater life.
Pilot operated check valves are fitted to every unit to prevent loss of control if a hose breaks and
hydraulically lock the cylinders when the control valve is in neutral.
This is especially import on open centred hydraulic systems, without the valves the tilt angle
would not hold, and the bucket would move.
The valves do not need adjusting or routine maintenance; they must always remain in the circuit.
Variable orifice valves are also fitted to control the speed of movement. These valves are
important to prevent damage to the system or bucket if the bucket tilts too quickly.
Option of bolt on cutting edge.
Manufactured for all makes and models of excavator from 1.5 to 20 tonnes.
Tile Drain Bucket – 3.9 ton – 5.5 ton Digger Excavator
Tile drain buckets have proven to give excellent service in pipe laying
and other utility applications as they dig out what you need to, saving and back fill costs and time.
Useful in clay and sticky ground, the bucket tapers both from
top to bottom and front to back aiding the emptying of the bucket and easy release from the
trench.
Rotating Excavator Grab – 5.6 ton – 7 ton Digger Excavator
